Draw any frame.

Truss turns a sentence into a measured bicycle drawing. Say what you ride and get a clean, editable SVG in seconds.

Touring Frame 56 cm, 4130 steel, 700c Sheet 01 / 05 73.0° 72.5° Reach 421 Wheelbase 941 Stack 578 Gear Inches 2×11, 50/34 rings, 11–32 cassette 50T ring 34T ring 406080100120 in 1112131415171921242832 Cog teeth 34×28, 32.8 in Three-Cross 32 spokes, 16 per flange Drive side Leading Trailing ERD 602 Hub Pressure by Weight Tubeless, road and gravel 23456bar 5060708090100110 Rider and bike, kg 283240 mm 75 kg, 3.1 bar Randonneur Build sheet, 600 km brevet 01020304 Bag supportDynamo hubFendersLow gear Front rack, 6 kg load6 V, 3 W, always on45 mm, full length30×36, 22 in Truss, drawn in 2.1 s

Draw a 56 cm steel touring frame with stack, reach and both angles marked.

Chart gear inches for a 50/34 crankset and an 11–32 cassette, highlight the climbing gear.

Explain three-cross lacing on a 32-spoke wheel, with one leading and one trailing spoke.

Plot tyre pressure against rider weight for 28, 32 and 40 mm tubeless tyres.

Lay out a build sheet for a randonneur bike with four numbered callouts.

Capabilities Drawings you can build from.

Sketch tools are great at mood, but a frame builder needs numbers. Truss draws to the millimetre, labels every angle and hands back paths you can cut, print or send to the shop.

SideFront 337Bar 420

0.00 s generating

Drawings arrive in seconds, not afternoons.

Geometry, mm SizeStackReachHeadSeatWheelbase 5053239871.0°74.0°921 5254740571.5°73.5°928 5456241372.0°73.5°934 5657842172.5°73.0°941 5859442873.0°72.5°949 6061043673.0°72.5°957 Stack over reach 56 Reach 390 to 440

Measured against the build, not guessed from a photo.

Give it a height and an inseam, get back a frame that fits.

Path data M200 70 C230 230 300 300 470 310 Drag a square or a dot. Arrow keys nudge the focused one.

Every line is a real path you can grab and move.

Solutions Where drawings meet the workshop.

The same model draws inside a chat, fills a build sheet for the shop floor and powers a size picker on a frame builder's store. More places soon; the first public model ships this winter.

ChatProject

Draw a steel fork for a 700×40 tyre, 45 mm rake

Here is a fork with a 45 mm rake and 395 mm axle to crown. Clearance is marked on the right.

01 Crown

02 Blade bend

03 Dropout

Write what to drawSend

ChatSheets

Build 0147Shop copy

Randonneur, 56

  1. 01Cut tubes to the list, mitre at 73.0° and 72.5°.
  2. 02Braze lugs, check centre line on the table.
  3. 03Rack bosses at 135 mm from the axle.
  4. 04Fender eyes front and rear, M5.

Tube set 8/5/8Weight 2.21 kgPage 1 of 3

FramesCart (0)

Audax frame

€ 2,480

52545658

Order frame

Get in touch.

Tell us what you build or ask anything about the waitlist.