Draw any frame.

Truss turns a sentence into a measured bicycle drawing. Say what you ride and get a clean, editable SVG in seconds.

Touring Frame 56 cm, 4130 steel, 700c Sheet 01 / 05 73.0° 72.5° Reach 421 Wheelbase 941 Stack 578 Gear Inches 2×11, 50/34 rings, 11–32 cassette 50T ring 34T ring 406080100120 in 1112131415171921242832 Cog teeth 34×28, 32.8 in Three-Cross 32 spokes, 16 per flange Drive side Leading Trailing ERD 602 Hub Pressure by Weight Tubeless, road and gravel 23456bar 5060708090100110 Rider and bike, kg 283240 mm 75 kg, 3.1 bar Randonneur Build sheet, 600 km brevet 01020304 Bag supportDynamo hubFendersLow gear Front rack, 6 kg load6 V, 3 W, always on45 mm, full length30×36, 22 in Truss, drawn in 2.1 s

Draw a 56 cm steel touring frame with stack, reach and both angles marked.

Chart gear inches for a 50/34 crankset and an 11–32 cassette, highlight the climbing gear.

Explain three-cross lacing on a 32-spoke wheel, with one leading and one trailing spoke.

Plot tyre pressure against rider weight for 28, 32 and 40 mm tubeless tyres.

Lay out a build sheet for a randonneur bike with four numbered callouts.