Repairs

How a clock goes through

Most pieces spend three to eight weeks with us, from the first look under the loupe to the day they tick on your own wall.

Process

Drop-off & Diagnosis

Bring the clock in, or send photographs first. We open the case with you there, listen to it, and write down every fault we can find before we promise anything.

If the movement is past saving we say so on the day, and point you to a case-maker or a collector who can give it a second life.

Process

Strip & Clean

The movement comes apart down to the last screw. Plates and wheels are washed, pivots are polished, and worn holes are marked for bushing.

Every part is laid out on a numbered tray and photographed, so the clock goes back together exactly as it left the maker.

Process

Mend & Reassemble

Broken teeth are replaced, springs are renewed and missing pieces are cut by hand on the lathe. Then the movement is rebuilt and oiled with the lightest touch it will take.

Process

Regulate & Return

Every clock runs on the test stand for at least ten days while we set its beat and rate. When it keeps time within a minute a week, it comes home with a written note and a year of free adjustments.